Live Chat

Features
Wireless

Flexible

Rechargeable

Secure

Easy to Use
Technical DocumentationPart Numbers Accessories

Accessories

Always-On Solo Wireless Boundary Microphone ChargerAlways-On Solo Wireless Boundary Microphone Charger   
Americas 05-TBLCHG-C
EMEA/APAC 05-TBLCHGEU-C

AC Adapter with 6' (182 cm) long power cord for a Solo Tabletop Boundary Microphone. The Always-On Charger allows the boundary microphone to plug into a power source, so that it is always available. No recharging necessary!

 

 

Antenna Extension Kit for Solo Executive or Executive HD Wireless Microphone System

Antenna Extension Kit Product Specifications (PDF)

The Revolabs Antenna Extension Kit is designed to extend the Revolabs Solo™  Executive or Executive HD™  System antennas up to six feet away from the Solo Executive or Executive HD Base Station.  In this case, the cable with a right angle connector is connected to the Base Station, and the antennas are cabled up to six feet away for better placement on the top or the back of the rack.  This may be necessary due to:

  • Equipment Configuration–  the door of the rack may restrict the placement of the antennas on the front of the Base Station. 
  • Antenna Visibility– the rack may be facing away from the room where the Revolabs Wireless Microphones are being utilized. 
  • Building structure or equipment location– the Base Station may be located behind a large metal object, such as a interactive board or panel, restricting antenna visibility. 

 

 

DECT Monitor
01-DECTMTR-01

Want to analyze the radio frequency band to see what could conflict with the Revolabs Wireless Microphones?  This device plugs into a USB port on a PC and will analyze what is operating within the DECT Spectrums.  Requires DECT Monitor Software. 

Downloads

 

 

Earpiece for Solo or xTag MicrophoneEarpiece for Wearable Microphone
01-EXEBUD-BLK-11

2.5 mm mono audio connector, 26" (66 cm) cable with in-line volume control, adjustable earpiece containing a 20mm high quality 32 ohm speaker, easy to clean.

Lanyard for Wearable Microphone

24" (61 cm) of 3/16th (5 mm) black rayon fiber with quick disconnect to hang the Solo™ or xTag™ wearable microphone around your neck.

 

 

Line-to_Mic ConverterLine-to-Mic Converter

6' (182 cm) cable to convert the Solo Single Channel Base line-level signal to a mic-level signal with XLR connector. The converter also blocks phantom power bias voltages.

 

Solo Wireless Microphone Charger BaseSolo Wireless Microphone Charger Base

Individual Charger Base for all Solo Wireless Microphone types. Charges one Solo Wireless Microphone at a time. Base only has charger functionality; it does not connect to conference systems or desktop computers.

Choose part number based on Solo System Used in Conjunction with Solo Charger Base.

Solo Single Channel Solo Executive/Fusion
Americas 02-SSGLCHG1-C
EMEA/APAC 04-SSGLCHG1EU-C		 Americas 02-DSKCHG-C
EMEA/APAC 04-DSKCHGEU-C

 

 

Tabletop DialerTabletop Dialer for Fusion Wireless
Microphone System
07-TTDIAL-01

Wireless RF remote control with touchpad and digital display with stored memory for quick dialing.